Kong ITAKA työvaljas S
Work and positioning harness, extremely light and comfortable.
• Equipped with three anchor points (ventral, sternal and dorsal) and two lateral positioning rings in light alloy, which can be locked in the closed position to prevent accidental entanglement.
• Ample padding to guarantee maximum comfort; lightened waistband to increase breathability, and superior padding with ergonomic shaping.
• Removable upper part which can be completely disconnected via the small, light alloy connector.
• Two loops on the shoulder straps where the Diapason system can be connected for vertical recovery.
• The waistbelt is equipped with two large gear loops and four textile loops for directly connecting tool bags. In addition, there are two other passages for captive insertion of gear-holding connectors.
• Predisposed for mounting the chest ascenders Futura bod Clean and Cam Clean via specific webbing with rings already installed.
• Rear attachment ring is positioned high on the back to allow backpacks and/or oxygen cylinders to be carried; this ring is also oriented in order to avoid accidental entanglement in the event of recovery from a confined space.
• Equipped with NFC chip to facilitate product traceability and to speed up periodic inspections.
• Accessories included: two special textile gear holder loops that can be placed on the shoulder straps or on the belt, removable with velcro.
• Available in three sizes (S, M / L and XL).
• Tested with 150 Kg (EN 813).
• High quality, Made In Italy!
| Paino | 0.025 kg (kilogramma) |
|---|
