30 SRJ perf levanki vaunu 6:1 lukoilla saksalaiseen skuuttaukseen
System 30 – Main Ball Bearing Car, Ball Bearing Sheaves, 6:1 Purchase, German Sheeting, Control Arms with Cam Cleat 38
SYSTEM 30 PERFORMANCE
System 30 Performance can be used for boats up to approximately 45′. When low friction and high purchase ratios are key requirements, this is the system to choose.
ADJUSTABLE CAM CLEAT ANGLE
The cam cleat angle can be fine tuned veritcally and horizontally, leading the control line straight to the trimmer.
MAIN SHEET CAR DETAILS
1. Torlon® ball bearings stabilize the sheave when subjected to side loads.
2. Stainless toggle
3. Stainless stand-up spring
4. Low pivot point handles side loads and the sheave house articulates to align correctly with the sheet direction. Easy operation with low friction.
5.
END CONTROL DETAILS
1. Aluminium sheaves with Torlon ball bearings.
2. Rubber shock absorbers.
3. Integral beacket for control lines.
System 30 Performance Ball Bearing Car for German sheeting and Cam Cleat control. Main sheet car in anodized aluminium and a 6:1 control line system. The sheave house is articulating and stabilized by two stainless springs and the sheet sheave is a V-shaped ø60 mm machined aluminium wheel on Torlon ball bearings
The arms are stainless and carries 38 mm composite Cam Cleats and three control sheaves each side.
The sheaves for the control line are ø40 mm machined aluminium with Torlon ball bearings, separated from each other in ball cages. This prevents ball-to-ball contact and makes for low friction.
System: 30p
Safe working Load: 1500 kg
Breaking Load: 3000 kg
Purchase: 6
Length: 260 mm
Width: 75 mm
Min Rv: 5000 mm
Min Rh: 5000 mm
| Paino | 2.077 kg (kilogramma) |
|---|---|
| Tuotemerkki | Selden |
